Product Description
IGE FP-14S-U "Thermo" High Temperature Axial Fan
Type: FP-14S-U
The axial fan is defined as a fan where air flows through the blades and parallel to the shaft it’s mounted on. Axial flow fans are usually specified for very large flow volumes against low static pressures. IGE uses several variations of blade configurations including radial curved, radially convoluted curve, radial inverse curve, reversible flow and propeller type. This series of fans has been developed and refined over the lifetime of the company and is suitable for continuous heavy duty applications at temperatures up to 2200 ° F. The axial flow fan is the most common type used in the aluminum annealing and treating industry.
- Inboard Bearing: SealMaster ER-23
- Sheave Bearing: SealMaster ER-23
Weg 00158ET3E145T-W22 NEMA Premium Efficiency Motor:
- Frame: 143/5T
- Output: 1.5 HP (1.1 kW)
- Number of Poles: 4
- Frequency: 60 Hz
- Rated speed: 1755 rpm
- Slip: 2.50 %
- Rated voltage: 230/460 V
- Rated current: 4.04/2.02 A
- L. R. Amperes: 33.9/17.0 A
- LRC: 8.4x(Code L)
- No load current: 2.20/1.10 A
- Rated torque: 4.49 ft.lb
- Locked rotor torque: 290 %
- Breakdown torque: 350 %
- Locked rotor time: 25s (cold) 14s (hot)
- Design: B
- Insulation Class: F
- Service factor: 1.25
- Temperature rise: 80 K
- Duty Cycle: Cont.(S1)
- Starting Method: Direct On Line
- Ambient temperature: -20°C to +40°C
- Altitude: 1000 m.a.s.l.
- Degree of Protection: IP55
- Enclosure: TEFC
- Mounting: F-1
- Approx. weight: 50.1 lb.