Furnace / Generator Parts

AFC Holcroft RTG-102 Radiant Tube Gas Burner RTG Series

AFC Holcroft RTG-102 Radiant Tube Gas Burner RTG Series PN: RTG-102 Dim: 15" For 7.50" Radiant Tube With Non Air Cooled Ignitor 1/2" NPT Sight Port 1-1/2" NPT Air Inlet, 3/4" NPT Gas Inlet and Burner Adapter Plate 'A' Painted Black  

IGE Type FP-29 Class "U" Fan Cartridge Assembly - AFC-Holcroft

IGE Type FP-29 Class "U" Fan Cartridge Assembly  PN: FP-29 For Operation up to 1600 Deg F. @ 1750 RPM (CW) Rotation Water-cooled Sealed Construction Syntron seal square insulated plug parallel motor mounting bracket with 10 HP-1750 RPM...

AFC Holcroft RTG-104 Radiant Tube Gas Burner RTG Series

AFC Holcroft RTG-104 Radiant Tube Gas Burner RTG Series PN: RTG-104 Dim: 15" For 7.5" ID Radiant Tube with Non-Air Cooled Igniter 1/2" NPR Sight Port 2" NPT Air Inlet, 1" NPT Gas Inlet and Burner Adapter Plate 'B' Painted Black with Flame...

AFC-Holcroft EZ-Gen B-30/D06 Burner, Natural Gas

AFC-Holcroft EZ-Gen B-30/D06 Burner, Natural Gas Part#:  B-30/D06 B-30/D06 BURNER FOR AFC-Holcroft EZ-GEN Endothermic Generator NATURAL GAS  22IN SQUARE X 14IN X 10-3/4IN ID CONDITION: NEW  

Flowserve Innomag A166511100, AA-1.5X1X6" Centrifugal Pump

Flowserve Innomag A166511100, AA-1.5X1X6" Centrifugal Pump PN: A166511100 The Flowserve Innomag A166511100 is a magnetic drive centrifugal pump with an ETFE lining. It's an overhung pump that's part of Flowserve's Innomag line, which are designed...

AKG Cool-Line A10-1 Forced Air Oil Cooler, AC

AKG Cool-Line A10-1 Forced Air Oil Cooler, AC PN: A10-1 AC motor-driven forced-air oil coolers use a fan to cool hydraulic fluid as it passes though the heat exchanger coil or core. They require access to an electrical power source and have a larger...

50 LB - HTD Endo & Exo Generator Nickel Catalyst 1" Cubes

Heat Treat Depot Endo & Exothermic Generator Catalyst 1" Cubes, 50 lb Box PN: HT1C-50 Designed specifically for use in endothermic and exothermic atmosphere generators. The catalyst cubes are porous, lightweight refractory that has been...

Protection Controls 3 Burner Protectifier with Timefier, 6642VLT-3-M45-15J

Protection Controls 3 Burner Protectifier With Timefier, 6642VLT-3-M45-15J PN: 6642VLT-3-M45-15J   Protectifier 6642VLT   Modularized Multi-Burner Control  Time Proven Plug-In Solid State FLAME-PAK Amplifier...

Maxon 408M Model 400 Ovenpak Gas Burner

Maxon 408M Model 400 Ovenpak Gas Burner PN: 408M MAXON's OVENPAK® 400 Series is the world's most flexible and reliable industrial burner. The OVENPAK® burns most any fuel gas and requires only low pressure fuel. This natural gas burner provides...

Moly Nuts 5/16-18

Moly Nuts 5/16-18        

Moly Nuts 1/4-20

Moly Nuts 1/4-20  IPSEN #: S456-0004      

Moly All thread 1/4-20 x 1" L

Moly Allthread 1/4-20 x 1 " L  

SSI Super Systems EF170178 TRIM eFlo Electronic Gas Flow Meter, Second Generation

SSI Super Systems EF170178 TRIM eFlo Electronic Gas Flow Meter, Second Generation PN: EF170178 The eFlo instrument is Super Systems Inc.’s electronic flow meter. eFlo works by measuring the differential pressure (the difference in pressure of a...

Ametek HDR SCR Power Control Model No. PF3-480-180-NO-01, 2710065

Ametek HDR SCR Power Control Model No. PF3-480-180-NO-01, 2710065 PN: 2710065 Model No: PF3-480-180-NO-01   Line Voltage: 480 VAC  Phase: 3 Hz: 60 Max Current: 180 A Input Control Signal: 4-20maDC Input Impedance: 500 OHMS Maximum...

Protection Controls 11 Burner Protectifier w/ Timefier, 6642VLT-11-M165-15J

Protection Controls 11 Burner Protectifier With Timefier, 6642VLT-11-M165-15J PN: 6642VLT-11-M165-15J   Protectifier 6642VLT    Modularized Multi-Burner Control  Time Proven Plug-In Solid State FLAME-PAK Amplifier...

North American Series 2300 Turbo Blower, w/ Baldor ECP83771T-4 Motor, 2316-35/1-

North American Series 2300 Turbo Blower, With Baldor Motor, 2316-35/1-T10D Turbo Blower: P/N: 2316-35/1-T10D The North American Series 2300 Turbo Blower is a direct drive burner blower designed to be powered by a 10 HP, 3500 RPM, explosion proof...

AFC Holcroft Radiant Tube Gas Burner RTG Series, RTG-104

AFC Holcroft Radiant Tube Gas Burner RTG Series, RTG-104 PN: RTG-104   Dim: 15" For 7.5" ID Radiant Tube with Non-Air Cooled Igniter 1/2" NPR Sight Port 2" NPT Air Inlet, 1" NPT Gas Inlet and Burner Adapter Plate 'B' Painted Black with...

AFC Holcroft Radiant Tube Gas Burner RTG Series, RTG-102

AFC Holcroft Radiant Tube Gas Burner RTG Series, RTG-102 PN: RTG-102 Dim: 15" For 7.50" Radiant Tube With Non Air Cooled Ignitor 1/2" NPT Sight Port 1-1/2" NPT Air Inlet, 3/4" NPT Gas Inlet and Burner Adapter Plate 'A' Painted Black

Selkirk 206211, Insulated 6" 30 Degree Elbow Kit

Selkirk 206211, Insulated 6" 30 Degree Elbow Kit  PN: 206211 AFC P/N: 18120 The Selkirk Chimney System (SCS) is ideal for venting residential heating appliances burning wood, 2-oil and natural and LP gas. They have been specifically designed...

Atmosphere Engineering Nitrogen Methanol Furnace Control System

Atmosphere Engineering Nitrogen Methanol Furnace Control System Automatic flow setpoint calculation – calculates the required nitrogen and methanol flowrates to maintain a desired %CO at the required volume Customizable recipe...

LDS Vacuum 220534 6 Tagged Wires, 1/2 MNPT, Copper Stranded, 16 Gauge, 36" INS/3

LDS Vacuum 220534 6 Tagged Wires, 1/2 MNPT, Copper Stranded, 16 Gauge, 36" INS/36" Out WFT6-1/2-CS (16) 36/36-T   Resistance: 4.016 Ω per 1000 feet Maximum current: 13 amps Power: 5304 watts at 408 volts, or 3120 watts at...

Eclipse Self-Recuperative / Radiant Tube Firing Burner, TFBO75

Eclipse Self-Recuperative And Radiant Tube Firing Burner, TFBO75 PN: TFBO30 EM Code: NPG3NNAL Eclipse low emissions TFB burners are designed to fire radiant and immersion tubes with inputs from 300,000 to 2,000,000 Btu/hr. With a vigorous spinning...

IGE "Thermo" High Temperature Axial Flow Fan, FP-29-U

IGE "Thermo" High Temperature Axial Flow Fan, FP-29-U PN: FP-29-U Very large flow volumes against low static pressures The axial fan is defined as a fan where air flows through the blades and parallel to the shaft it’s mounted on. Axial flow...

The New York Blower Co. Backward Inclined SWSI Class III ARR-4

The New York Blower Co. Backward Inclined SWSI Class III ARR-4 PN: Class III  NYB Single-Width Fans feature three types of backward inclined wheels for maximum selection flexibility and optimum performance: AcoustaFoil® wheels with airfoil...

Eclipse Self-Recuperative / Radiant Tube Firing Burner, TFBO30

Eclipse Self-Recuperative And Radiant Tube Firing Burner, TFBO30 PN: TFBO30 EM Code: NPE3NNAL Eclipse low emissions TFB burners are designed to fire radiant and immersion tubes with inputs from 300,000 to 2,000,000 Btu/hr. With a vigorous spinning...

IGE "Thermo" High Temperature Axial Flow Fan, FP-29-L Powered by Baldor EM3774T

IGE "Thermo" High Temperature Axial Flow Fan, FP-29-L  PN: FP-29-L Very large flow volumes against low static pressures The axial fan is defined as a fan where air flows through the blades and parallel to the shaft it’s mounted on. Axial...

50 lb Box -HTD Endo & Exo Generator Nickel Catalyst 11/16" Cubes

Heat Treat Depot Endo & Exothermic Generator Catalyst 11/16" Cubes, 50 lb Box PN: HT1116C-50 Designed specifically for use in endothermic and exothermic atmosphere generators. The catalyst cubes are porous, lightweight refractory that has been...

Solberg Manufacturing Combustion Blower Filter Enclosure

Solberg Manufacturing Combustion Blower Filter Enclosure Overall Filter Diameter: 6-1/2" Inside Filter Diameter: 3-5/8" NPT: 1-1/2"    

IPSEN Moly All thread 1/4-20 x 1 3/4" L - AB5144-04

IPSEN Moly Allthread 1/4-20 x 1 3/4" L IPSEN Part #: AB5144-04

W.E. Anderson Midwest SFI-100-1-1/2 Sight Flow Indicator

W.E. Anderson Midwest SFI-100-1-1/2 Sight Flow Indicator PN: SFI-100-1-1/2 Specifications Primary brand: Dwyer Secondary brand: W.E. Anderson Main function: Sight glass (Flow) Product series / family...

Leybold-Heraeus 18328 Centering Rings DN 40 ISO-KF

Leybold-Heraeus 18328 Centering Rings ISO-KF PN: 18328 Size: DN 40 ISO-KF Material: Aluminum Sealing Compound: Neoprene Dimensions Inches O-Ring OD: 2" ID: 1-5/8" Thickness: 3/16"  mm O-Ring OD: 50.68mm ID: 41...

Leybold-Heraeus 18448 Aluminum Blank Flange

Leybold-Heraeus 18448 Aluminum Blank Flange PN: 18448  Blank-Flange DN 40 KF Al 

Miscellaneous Heat Treating Furnace Legend Plates for 30mm Switches, QTY:82

Miscellaneous Heat Treating Furnace Legend Plates for 30mm Switches, QTY:82 

Combustion Blower Filter Enclosure 10"x12"

Combustion Blower Filter Enclosure 10"x12" (Used)   Diameter: 12" Height: 10" 

Eclipse Furnace Burner Igniter Mount-03976

Eclipse Furnace Burner Igniter Mount-03976 (Used)  PN: 03976 Igniter NPT: 1/2" Igniter Pipe NPT: 3/4" 2 Larger Mounting Hole Size: 1/2" Remaining 2 Smaller Mounting Hole Size: 1/8"  

Furnace Vacuum O-Rings, 1-3/4"OD, 1.77mm Thick, Bag of 4

Furnace Vacuum O-Rings, 1-3/4"OD, 1.77mm Thick, Bag of 4   Outer Diameter: 1-3/4" Inner Diameter: Thickness: 1.77mm

Furnace Vacuum O-Rings, 0.87" OD, 0.66" ID, 0.09" Thick, Bag of 5

Furnace Vacuum O-Rings, 0.87" OD, 0.66" ID,  0.09" Thick, Bag of 5   Inner Diameter: 0.66" Outer Diameter: 0.87" Thickness: 0.09"

Furnace Vacuum Cap Gaskets, 2.18" OD, 1.88" ID, 0.06" Thick, Pack of 6

Furnace Vacuum Cap Gaskets, 2.18" OD, 1.88" ID, 0.06" Thick, Pack of 6   Inner Diameter: 1.88" Outer Diameter: 2.18" Thickness: 0.06"

Furnace Vacuum O-Rings, 2" OD, 1-3/4"ID, 2.4mm Thick Pack of 6

Furnace Vacuum O-Rings, 2" OD, 1-3/4"ID, 2.4mm Thick Pack of 6   Outer Diameter: 2" Inner Diameter: 1-3/4" Thickness: 2.4mm

Alcon Tube Wall Hanger 81-R-99, 4" x 4-3/4" HT Alloy

Alcon Alloy Tube Wall Hanger 81-R-99, 4" x 4-3/4"  PN: 81-R-99 Mount Holes: 2 Mount Hole Dia.: 11/16" Hook Length:1-1/4" Hook Width: 2-1/2" Type of Metal: HT Alloy