Eclipse Combustion Inlet Pipe Flange, 3566, 2" NPT

Eclipse Combustion Inlet Pipe Flange, 3566, 2" NPT Part#: 3566; 117196   O.D: 6" Height: 1.5"    

Eclipse Furnace Burner Igniter Mount-03976

Eclipse Furnace Burner Igniter Mount-03976 (Used)  PN: 03976 Igniter NPT: 1/2" Igniter Pipe NPT: 3/4" 2 Larger Mounting Hole Size: 1/2" Remaining 2 Smaller Mounting Hole Size: 1/8"  

Eclipse Combustion Burner Pilot Mounting Flange

Eclipse 2 Bolt Mounting Flange   W: 2-1/8" H: 1-11/16" L: 4" Bolt ID: 7/16" NPT Top: 3/4" Bottom Side Opening: 1/16"

Eclipse Single Ended Radiant (SER) Tube Burner - SER3, 600-350NNST1000UM1250

Eclipse SER3.600 Burner  PN: 600-350NNST1000UM1250  SER3.600 Eclipse Model SER Single-Ended Radiant Tube Burners incorporate the components of a tube firing burner system in a compact package. The SER burner is a nozzle mixing burner and...

Industrial Pilot Burner 25"

Industrial Pilot Burner 25" (Surplus) PN: 03976 PF 3 Shaft Rating: 111793 Length of Burner Nozzle/Tip: 3.98" Diameter of Nozzle: 3.01 Length of Burner Shaft: 18" Nozzle Included      14" thread to Nozzle Size of body: 4...

Hauck Manufacturing 4 1493 Burner Nozzle Tip

Hauck Manufacturing 4 1493 Burner Nozzle Tip PN: 4-1493 3-1/2" Threaded Outside Diameter 3" NPT Non-threaded Side Outer Diameter: 3.16"      

Hauck Nozzle Assembly For RFG Burner 8in

Nozzle Assembly for RFG Burner 8in   Measurements of the bottom cylinder base (2nd image) Inner Diameter: 3-1/16" Outer Diameter: 3-1/2" Measurements of the top (first image) Groove  Inner Diameter: 1-1/2" Outer Diameter:...

KROMSCHRODER 115V 7.5KV IGNITION TRANSFORMER 84329111

KROMSCHRODER 115V 7.5KV IGNITION TRANSFORMER Part#: 84329111 Enclosed: No (TZI) High Voltage: 7.5 kV Output Current: 20 mA at 50 Hz Duty Cycle: 33% Main Voltage: 115 V AC (R) Ignition transformer, unenclosed...

Eclipse Burner Air Inlet Housing Part# 3912

Eclipse Burner Air Inlet Housing Top Flange full width: 4.5" Top Flange full length: 4.5" Top Flange bolt size: 5/16" Top Flange Inner Dia.: 3-11/16" Bottom Flange full width: 5.5"  Bottom Flange full length: 6"  Bottom Flange bolt...

Eclipse Exhaust Housing

Eclipse Exhaust Housing Full width on bottom: 6-5/8" Full length on bottom: 6.5" Full width on top: 5.5" Full length on top: 5.5" Bolt size: 9/16" Inner Dia.: 4-1/4" Exhaust Inner Dia.: 2-1/4"  

Eclipse Combustion Burner Caps Part#: 3909

Eclipse Combustion Burner Cap Part #: 3909 Part #: 10.24.97 Bolt size: 7/16" Thread in size on left is: 9/16" Thread in size on right is: 7/16" Thread in size on bottom is: 11/16" Thread in size on top is: 11/32"  

Surface Combustion VM2 Burner Pilot Valve

Surface Combustion VM2 Burner Pilot Valve   Exhaust End Size: 2-11/32" Gas Thread in Size: 15/16" Length: 17-1/4"

ICS A2069 18 Duck Tip Jet Burner

ICS A2069 18 Duck Tip Jet Burner    Natural Gas 18 Duck Tip Jets 7-3/4" Diameter 1/2" NPT Cast Iron For Wok Ranges 125,000 BTU

Surface Combustion Pilot Burn off Nozzle

Pilot Burn Off Nozzle 7-1/2" Length 1" Diameter 1/4" NPT  

North American 4725E-4 Radiant Tube Burner

North American 4725E-4 Radiant Tube Burner PN: 4725E-4 Direct Spark Ignition Adjustable flame geometry: — Engineered combination of diffusion flame and variable partial premix via primary air adjustment permits flame shaping as required to match...

North American Manufacturing Company H6195B Electronic Controller

North American Manufacturing Company H6195B Electronic Controller   DIGITAL DISPLAY PANEL MOUNT  

Pyronics 4001-NM-R-1-BH Nozzle Mix Burner

Pyranic 4001-NM-R-1-BH Nozzle Mix Burner Nozzle Mix Burners are short flame high-capacity units designed for extremely wide turndown ranges. Gas and air are mixed only at the point of discharge, flashback is prevented...

Maxon 57834 Uni-Rad Burner

Maxon Uni-Rad Burner Air Inlet Tube Length: 11.5" Tube Diameter: 1.5" 226,000 BTU MAXON's UNI-RAD Radiant Tube Burner produces an extremely stable and luminous flame that maximizes heat transfer throughout radiant tube furnaces. Flame ignition...

North American Series 37-0227/DI Radiant Tube Gas Burner

Part number: 37-0227/DI   The North American series radiant tube gas burner is designed to adapt to most radiant tube applications. Fuel is burned by a combination of diffusion flame and adjustable partial premix combustion. A simple,...