Honeywell S7820A1007 Remote Reset Module (Used)

Honeywell S7820A1007 Remote Reset Module PN:S7820A1007   Remote reset module for 7800 series relays Operating Temperature: -40 TO 140°F Reset pushbutton can be installed up to 1000 feet away Installs directly on the front of the 7800...

Honeywell Q270A-1024 Universal Mounting Base

Honeywell Q270A-1024 Universal Flame Safeguard Mounting Base For RA890, R485, and R7023  

Honeywell R7023B1003 120V Flame Safeguard Protectorelay

Honeywell R7023B1003 120V Flame Safeguard Protectorelay     120 VAC 50/60 HZ 2 SPDT Switching  

Protection Controls, Inc Protectofier ACF Relay USED

Protection Controls, Inc Protectofier ACF Relay   Flame Safety Component Used on Protection Controls Protectofier Flame Safety device

Honeywell RA890G1260 - 120V - Flame Safe Guard Protectorelay USED

Honeywell RA890G1260 - 120V - Flame Safe Guard Protectorelay   120 VAC 50/60 HZ 15 SEC / 3 SEC Employs rectification principle of electronic flame detection using a flame rod, rectifying photocell, or C7012A,C Ultraviolet Flame Detector...

Kromschroder IFW 15T-N Flame Relay 84359100

Kromschroder IFW 15T-N Flame Relay Part #: 84359100 Main Voltage: 110-120 V AC, 50/60 Hz (N) For the detection and signaling of the presence of a flame by means of ionization or UV control. The flame detector is intended for use in conjunction...

KROMSCHRODER 115V 7.5KV IGNITION TRANSFORMER 84329111

KROMSCHRODER 115V 7.5KV IGNITION TRANSFORMER Part#: 84329111 Enclosed: No (TZI) High Voltage: 7.5 kV Output Current: 20 mA at 50 Hz Duty Cycle: 33% Main Voltage: 115 V AC (R) Ignition transformer, unenclosed...

Kromschroder UVS 10D1G1, UV Flame Sensor (84315202)

Kromschroder UVS 10D1G1, UV Flame Sensor (84315202)   Kromschroder UV sensor for monitoring gas burners in intermittent operation, EU certified in conjunction with Kromschröder automatic burner control units. Series 10 Quartz glass heat...

Eclipse Multi-Flame Multiple Burner Monitoring System

Eclipse Multi-Flame Multiple Burner Monitoring System   Eclipse Multi-Flame Model 6000M Mother Board W/RS232 Part#: 22493 J1 Inputs: 120V J1 Outputs: 120V Eclipse Model 6500 Multi-Flame Burner Monitoring System Part#: 22579 All...

Fireye 60-2204-2 Flame Amplifier Module

Fireye 60-2204-2 Flame Amplifier Module PN: 60-2204-2 The 60-2207-2 is a high discrimination amplifier for use on single or multiburner applications where background radiation is present (e.g. flame signal from adjacent flame tips, hot refractory,...

Fireye 60-2206-1 Wiring Base

Fireye 60-2206-1 Wiring Base

Honeywell RM7895A1014 Automatic Programming Control USED

Honeywell RM7895 A 1014 Automatic Programming Control PN: RM7895 A 1014 120VAC; 50/60Hz Use with R7847, R7848, R7849 and R7888 Amplifiers  

Honeywell R7847B1031 Dynamic Ampli-Check Rectification Flame Amplifier

Honeywell R7847B1031 Dynamic Ampli-Check Rectification Flame Amplifier     3 seconds, use with flame rod photo cell or C7012A Operating ambient temperature -40 deg F to 140 deg F -40 deg C to 60 deg C        

Protection Controls 7256-BT30-15NRE Protectofier (Used)

Protection Controls 7256-BT30-15NRE Protectofier (Used)   OPERATE WITH FLAME ROD AND/OR P-C II SCANNER 7256 FEATURES:   • Compact Design - Single Burner   • Time Proven Plug-in Solid State FLAME-PAK...

Protection Controls Flame Pak Relay SS100A (Used)

Protection Controls Flame Pak Relay SS100A The SS100A Protectofier Flame Pak plug-in electronic sensing unit provides immediate response via the flame rectification principle. Sensing is achieved either by a flame rod which creates a dc signal to the...

North American Manufacturing Company H6195B Electronic Controller

North American Manufacturing Company H6195B Electronic Controller   DIGITAL DISPLAY PANEL MOUNT  

Honeywell Rectification Flame Amplifier R7847A1025

Honeywell R7847A1025 Rectification Flame Amplifier   Self Checking: None (standard)Flame Failure Response Time: 0.8 sec or 1.0 secSolid state plug-in amplifiers that respond to flame detector inputs to indicate the presence of flame when used with...

Kromschroder TC 218R05-H Valve Proving Controls

Kromschroder TC 218R05-H Valve Proving Controls   110/120VAC; 50/60Hz 5A -15/+60°C PMAX: 500MBAR TP(S): 10,20,30,40,50,60 Gas: 1,2,3

Honeywell RM7823 A 1016 Primary Flame Switch Burner Control

Honeywell RM7823 A 1016 Primary Flame Switch Burner Control  Microprocessor-based integrated flame switch for detecting a flame using rectification, ultraviolet (UV) or infrared (IR) source. Provides level of safety, functional capability and...

US Ignition J-R6011 w/ 24" Extension Rod Flame Rod

US Ignition R6011 w/ 24" Extension Rod 1/2-14 NPT Thread Spark plug type Replaces: Auburn FRS-2-18    

White Rodgers F115-0100 Harness Assembly

White Rodgers F115-0100 Harness Assembly - 4E946 Tech Specs  Harness connects ignitor with ignition control Wire and connectors are rated at 105°C 24" lead lengths Connects The 767A Ignitor With The 50E47 Or The 50F47 Ignition...

Dongan A06-SA6 Ignition Transformer 120v 60hz (Used)

Dongan A06-SA6 Ignition Transformer  Product features Duty Cycle: 100% Voltage Rating: 120 TO 6,000 V KVA: 6 Number of Phases:  1 Current Rating:  175 A Enclosure: NEMA 1 Oil and gas furnace ignition...

Dongan A05-SA6 Ignition Transformer

Dongan A05-SA6 Ignition Transformer   DONGAN A05-SA6 A05SA6 IGNITION TRANSFORMER 115VA 120V PRI 5000V SEC Dongan Ignition Transformer, End Ground Universal, 120 VAC Primary, 5000 VAC Secondary, 115 VA, 60 Hz, 20 mA Maximum, 100% Duty Cycle, NEMA 1,...

Honeywell RM7885A1015 Manual Start Primary Control (Used)

Honeywell RM7885 A 1015 Manual Start Industrial Primary Control (Used)   Part #: RM7885A1015   120V SEMI-AUTOMATIC PRIMARY CONTROL, START STOP IN   Honeywell Manual Start Industrial Primary Control RM7885A1015...

Honeywell RM7895D1011 Primary Control

Honeywell RM7895D1011 Primary Control Part #: RM7895D1011  Description On-Off Primary Control with Shutter Drive Output, Valve Proving Feature, and blinking LED fault annunciationOverview:Microprocessor-based integrated burner control for...

Honeywell RM7823A1016 Flame Detector Control

Honeywell RM7823A1016 Flame Detector Relay Part#: RM7823A1016 Features:   Application flexibility. First-out annunciation and system diagnostics provided by 2 row by 20 column Vacuum Fluorescent Display (VFD). “Call Service”...

Honeywell S7800A1001 Programmer Burner Control

Honeywell S7800 A 1001 Programmer Burner Control   Provides current status of burner sequence, timing information, hold information and lockout information, as well as selectable or preemptive messages.   Features: Application...

Trafo Union ZE 30/7 ENR 4041 661 Ignition Transformer

Trafo Union ZE 30/7 ENR 4041 661 Ignition Transformer Type: ZE 30/7 Pri. 230V, 50Hz

Abic 8718973-022 UV-Diode

Abic 8718973-022 UV-Diode    

Abic 8718945-072 Ignition electrode

 Abic 8718945-072 Ignition electrode Part#: 8718945-072 • Suitable for Abig: GE/GZ/GSI 50/100/180• Wire ø: 2.5 mm• Isolator: 8.2 x 80 mm• Connection: 6.3 mm• Ref. no.: 8718945-072

SSI Super Systems PM1000 Flame Pilot Monitoring Systems

Super Systems, Inc PM1000 Flame Pilot Monitoring System PART # PM1000 Single Flame Pilot Monitoring System in a NEMA wall mount enclosure Includes: NEMA 12 Enclosure Flame Relay Ringback Alarm Color:  Industrial White Does not include...

Protection Controls, Inc Protectofier ACF Relay

Protection Controls, Inc Protectofier ACF Relay   Flame Safety Component Used on Protection Controls Protectofier Flame Safety device

Honeywell Flame Sensor C7027A1023, UV Minipeeper, 1/2" Mount - USED

Honeywell C7027A1072 Minipeeper UV Sensor   Description Includes: 1/2 in. NPT threaded spud connector.Compact flame detector for use with flame safeguard controls with ultraviolet amplifiers.Features: Use with Honeywell Flame Safeguard...

Honeywell Rectification Flame Amplifier R7847A1033

Honeywell Rectification Flame Amplifier R7847A1033 R7847A1033 is a solid state plug-in amplifier that responds to flame detector inputs to indicate the presence of flame when used with 7800 Series relay modules. Ambient Temperature:  -40 to +60...

Honeywell Q7800A1005 7800 Series- Wiring Subbase

Honeywell Q7800 A 1005 7800 Series- Wiring Subbase Panel mount. Steel frame with knockouts in back, top, and bottom for conduit Connection s. Provides 22 terminals for field wiring. Weight 5 lbs. Dimensions 12 x 9 x 12.5...