Product Description
SMC CEU5B-D Multi Counter / Cylinder Controller
PN: CEU5B-D
The SMC CEU5B-D is a multi-counter that works with high precision, stroke reading cylinders, such as CEP1 or CE1. It uses an RS-232C communication system and multiple counters can be linked together. Series CEU5, multi counter was developed to work with CEP1 or CE1 high precision, stroke reading cylinders. CEU5 utilizes a RS-232C communication system which allows multiple counters to be linked together (each counter has a unique address, 1-99.
- Type: Multi-counter
- Mounting: Surface mounting (DIN rail or Screw stop)
- Operating System: Adding - subtracting type
- Operation Mode: Operating mode, Data setting mode, Function setting mode
- Rest System: External reset terminal
- Display System: LCD (With back light)
- Number of Digits: 6 digits
- Memory holding {Storage medium}: Setting value (always held), Count value (Hold/Non-hold switching), {E2ROM (Warning display after writing approx. 800,000 times: E2FUL)}
- Input Signal Type: Count input, Control signal input (Reset, Hold, Bank selection)
- Count Input: No-voltage pulse input
- Pulse Signal System: 90° phase difference input ∗1/ UP/DOWN separate input∗2
- Counting Speed: 100 kHz ∗1
- Control Signal Input: Voltage input (12 VDC or 24 VDC)
- Sensor Power Supply: 10.8 to 13.2 VDC, 60 mA
- Output Signal Type: Preset output, Cylinder stop output, BCD output
- Preset Output Configuration: Compare/Hold/One-shot (100 ms fixed pulse)
- Output Type: Separate 5 point output/Binary code output
- Output Delay Time: 5 ms or less (for normal output)
- Communication System: RS-232C
- Output Transistor Mode: PNP open collector Max 30 VDC, 50 mA ∗3
- Power Supply Voltage: 90 to 264 VAC, 21.6 to 26.4 VDC
- Power Consumption: 20 VA or less, 10 W or less
- Withstand Voltage: Between case and AC line: 1500 VAC for 1 min., Between case and signal ground: 500 VAC for 1 min.
- Insulation Resistance: Between case and AC line: 500 VDC, 50 MΩ or more
- Ambient Temperature: 0 to 50°C (No freezing)
- Ambient Humidity: 35 to 85% RH (No condensation)
- Noise Resistance: Square wave noise from a noise simulator (pulse duration 1 µs) between power supply terminals ±2000 V, I/O line ±600 V
- Shock Resistance: Endurance 10 to 55 Hz; Amplitude 0.75 mm; X, Y, Z for 2 hours each
- Impact Resistance: Endurance 10 G; X, Y, Z directions, 3 times each
