Product Description
SKF SY 1-5/16 TF Pillow Block Ball Bearing Unit With Extended Inner Ring And Set Screw Locking
PN: SY 1.5/16 TF
Pillow (plummer) block ball bearing units consist of an insert bearing mounted in a cast iron housing that can be bolted to a support surface. This variant is suitable for applications with both constant and alternating directions of rotation. It has an inner ring extended on both sides and is locked onto the shaft by tightening a set screw on the inner ring, making it easy to mount.
- Strong
- Ready to mount
- Lubricated and sealed bearing
- Quick locking onto the shaft
- Cost-effective
Specifications
- Bearing Insert: YAR 207-105-2F
- Attachment bolt diameter0.5 in
- Shaft diameter1.313 in
- Centre height (pillow block)1.874 in
- Housing overall width: 1.772 in
- Centre distance between bolt holes: 4.961 in
- Bearing width, total: 1.689 in
- Basic dynamic load rating: 5 733 lbf
- Basic static load rating: 3 440 lbf
- Limiting speed: 5 300 r/min
- Note: Limiting speed with shaft tolerance h6
- Housing type: Pillow block
- Number of bolt holes for fasteners: 2
- Fastening bolt hole type: Plain
- Retaining feature, inner ring: Set screws
- Bore type: Cylindrical
- Rubber seating ring: Without
- Material, housing: Cast iron
- Material, bearing: Bearing steel
- Coating: Without
- Sealing, bearing: Seal and flinger on both sides
- Sealing type: Contact, standard
- Lubricant: Grease
- Relubrication hole: With
- Grease fitting: With
- Basic dynamic load rating: 5 733 lbf
- Basic static load rating: 3 440 lbf
- Limiting speed: 5 300 r/min
- Note: Limiting speed with shaft tolerance h6
