Product Description
SKF SY 1-15/16 TF Pillow Block Ball Bearing Unit With Extended Inner Ring And Set Screw Locking
PN: SY 1-15/16 TF
Pillow (plummer) block ball bearing units consist of an insert bearing mounted in a cast iron housing that can be bolted to a support surface. This variant is suitable for applications with both constant and alternating directions of rotation. It has an inner ring extended on both sides and is locked onto the shaft by tightening a set screw on the inner ring, making it easy to mount.
- Strong
- Ready to mount
- Lubricated and sealed bearing
- Quick locking onto the shaft
- Cost-effective
Specifications
- Shaft diameter: 49.213 mm
- Centre height (pillow block): 57.2 mm
- Housing overall width: 54 mm
- Centre distance between bolt holes: 157 mm
- Bearing width, total: 51.6 mm
- Basic dynamic load rating: 35.1 kN
- Basic static load rating: 23.2 kN
- Limiting speed: 4 000 r/min
- Note: Limiting speed with shaft tolerance h6
