Product Description
Ruland SPK-20-SS Two Piece Shaft Collar
Ruland SPK-20-SS is a two-piece shaft collar with a 1 1/4" bore, 2 1/16" OD, 0.500" width, and 1/4" keyway. The clamp style design does not mar the shaft, is easy to remove, and is indefinitely adjustable. It is commonly used for guiding, spacing, stopping, mounting, and component alignment. The keyway prevents slippage on the shaft when the shaft collar is used for positive drive. Equipment manufacturers benefit from the tightly controlled face to bore perpendicularity of Ruland shaft collars, TIR of ≤ 0.002". Perpendicularity is critical for alignment when the shaft collar is used as a load bearing face, mechanical stop, or for mounting components such as gears or bearings. Proprietary processes have been developed by Ruland to maintain superior fit, finish, and holding power. SPK-20-SS is stamped with the Ruland name and bore size for ease of identification. Halves are mated throughout the manufacturing process for proper fit and alignment. Forged screws test beyond ANSI standards to ensure maximum holding power. SPK-20-SS is manufactured from solid bar stock sourced from select North American mills and machined to a fine burr free finish. Ruland uses 303 stainless steel with hardware of like material for consistent corrosion resistance. Stainless steel hardware undergoes a proprietary surface treatment process to prevent galling. SPK-20-SS is RoHS3 and REACH compliant and manufactured in our Marlborough, MA factory under strict controls using proprietary processes.
DIMENSIONS | |||
---|---|---|---|
Bore (B) |
1 1/4 in |
Bore Tolerance |
+0.0020 in / +0.0005 in |
Keyway (K) |
1/4 in |
Width (W) |
0.500 in |
Outer Diameter (OD) |
2 1/16 in |
Width Tolerance |
+0.003 in / -0.010 in |
Clearance Diameter (C) MAX |
2.295 in |
Recommended Gap |
0.063 in |
Recommended Shaft Tolerance |
+0.0000 in / -0.0005 in | ||
FASTENING HARDWARE | |||
Forged Clamp Screw |
1/4-28 |
Screw Material |
18-8 300 Series Stainless Steel |
Hex Wrench Size |
3/16 in |
Screw Finish |
Bright |
Seating Torque |
110 lb.-in |
Screw Location (R) |
0.828 in |
Number of Screws |
2 ea |