Product Description
OPTO 22 G4 OAC5 Digital AC Output Module
PN: G4OAC5
The G4OAC5 is a digital AC output module with an output voltage range of 12–140 VAC, requiring a typical logic voltage of 5 VDC. It is compatible with Opto 22 brains and Raspberry Pi. This AC output module is equivalent to a single-pole, single-throw, normally open contact (Form A, SPST-NO). It includes a 4 amp fast-blow fuse. Opto 22’s G4 AC output modules are used to control or switch AC loads. Each module provides up to 4000 volts of optical isolation (transient) between field outputs and the control side of the circuit, and each features zero voltage turn-on and zero current turn-off. Typical applications for AC output modules include switching loads such as AC relays, solenoids, motor starters, heaters, lamps, and indicators. Compatible with Raspberry Pi. The G4OAC5 can be used with the Digital I/O Carrier Board for Raspberry Pi® (part number OPTO-P1-40P) to monitor and control industrial devices with your Raspberry Pi.
- Nominal line voltage: VAC 120
- Output voltage range: VAC 12–140
- Current rating at 45 °C ambient: 3 A
- Current rating at 70 °C ambient: 2 A
- UL Motor Load Rating: A 1.5
- Isolation input-to-output (transient): 1 ms / 4000 Volts, 1 minute / 1500 Volts
- Off-state leakage at nominal voltage (60 Hz): 5 mARMS
- Nominal logic voltage: 5 VDC
- Logic voltage range: 4-8 VDC
- Logic pickup voltage: 4 VDC
- Logic dropout voltage: 1 VDC
- Logic input current at nominal logic voltage: 12 mA
- Control resistance (Rc in schematic): 220 ohms
- One-cycle surge: 80 A peak
- Turn-on time @ 60 Hz: ≤8.3*** milliseconds
- Turn-off time @ 60 Hz: ≤8.3**** milliseconds
- Peak repetitive voltage: 500 VAC
- Minimum load current: 20 mA
- Output voltage drop maximum peak: 1.6 V
- Operating frequency: 25-65 Hz
- dV/dT-off-state V/micro-seconds: 200
- dV/dT-commutating: snubbed for 0.5 power factor load
- Operating temperature: -30 to +70 °C
- Storage: temperature: -30 to +85°C
