Product Description
Martin 50BS16HT 1-1/4" Sabertooth Sprocket
PN: 50BS16HT 1 1/14
Features:
- These finished bore sprockets are hardened, shaft ready and come complete with keyways and setscrews.
- The keyways are on center line of the tooth.
- Bored to size sprockets with ½ inch bores and smaller are stocked with (2) setscrews only.
- Tolerances meet or exceed ANSI standards
- Manufactured of high carbon steel
- Precise machining and processes ensure consistent finish and high quality
- Bores are concentric to pitch line, minimizing run out
- 2 set screws-keyed on centerline of tooth
- Enhanced depth and location of heat treatment increases life of part.
Specifications:
- Bore Type: Bored to Size
- Chain Number & Pitch: 50 / 5/8 in
- Number Of Teeth: 16
- Bore Diameter: 1.2500 in
- Outside Diameter: 3.5170 in
- Number Of Strands Across: 1
- Caliper Diameter: 2.8036 in
- Material: Steel
- Chain Number: 50
- Hardened Teeth: With Hardened Teeth
- Hub Diameter: 2-1/2 in
- Hub Outside Diameter: 2.5000 in
- Hub Projection: 0.6563 in
- Keyway Size: 1/4 X 1/8 in
- Length Through Bore: 1.0000 in
- Maximum Bore Diameter: 1.75 in
- Number Of Hubs: 1
- Number Of Set Screws: 2
- Pitch Diameter: 3.2036 in
- Pitch Type: Single
- Set Screw Location: 2SS, KEYWAY & 90°
- Set Screw Size: .313-18 X .313 in
- Stocked Finished Bore: 1 1/4 in
- Tooth Thickness: 0.343
- Tooth Width: 0.3430 in
- Weight: 1.3, 1.19 lbs
