Product Description
Keyence FS-N42P Fiber Optic Sensor
PN: FS-N42P
- Model: FS-N42P
- Type: Cable
- Output: PNP
- Main unit/expansion unit: Expansion unit
- Response time: 23 µs (S-HSPD*1) /50 µs (HSPD*2) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER) /4 ms (ULTRA) /16 ms (MEGA) /64 ms (TERA)
- Number of control outputs: 1
- Light source: LED
- Transmitter side: Red, four-element LED (wavelength: 660 nm)
- Control output: Open-collector, 30 V or less 100 mA or less per output, 100 mA or less total for 2 outputs (when used as a solitary unit) /20 mA or less (when used as an expansion unit) Residual voltage: 1.6 V or less (output current: 10 mA or less) /2.2 V or less (output current: 10 to 100 mA)
- External input: Input time: 2 ms (ON) /20 ms (OFF) or longer*3
- Unit expansion: Up to 16 units (17 units connected in total including the main unit) . However, each dual output type will be treated as two expansion units.
- Protection circuit: Protection against reverse power connection, output overcurrent, output surge, and reverse output connection
- Mutual interference prevention: S-HSPD/HSPD: 0 units, FINE: 4 units, TURBO/SUPER/ULTRA/MEGA/TERA: 8 units (The mutual interference prevention values are twice those shown here when Double is set.)
- Power voltage: 10 to 30 VDC (including 10 % ripple (P-P) or less) , class 2 or LPS*4
- Power consumption: During normal operation: 910 mW or less (36 mA or less at 24 V/65 mA or less at 12 V) ECO ON: 840 mW or less (33 mA or less at 24 V/60 mA or less at 12 V) ECO FULL: 750 mW or less (30 mA or less at 24 V/52 mA or less at 12 V)*5
