Product Description
IFM PN7003 Pressure Sensor With Digital Display
- Two programmable switching outputs
- With long-term stability thanks to high overload protection
- Lifespan of more than 100 million pressure cycles
- Clearly visible numerical display
- Country-specific pressure units selectable
| Output signal | switching signal; IO-Link; (configurable) | ||||||
| Measuring range |
|
||||||
| Process connection | threaded connection G 1/4 Internal thread | ||||||
| Application | |||||||
|---|---|---|---|---|---|---|---|
| System | gold-plated contacts | ||||||
| Application | for industrial applications | ||||||
| Media | liquids and gases | ||||||
| Medium temperature [°C] | -25...80 | ||||||
| Min. bursting pressure |
|
||||||
| Pressure rating |
|
||||||
| Type of pressure | relative pressure | ||||||
| Electrical data | |||||||
| Operating voltage [V] | 18...36 DC; (according to EN 50178 SELV/PELV) | ||||||
| Current consumption [mA] | < 35 | ||||||
| Min. insulation resistance [MΩ] | 100; (500 V DC) | ||||||
| Protection class | III | ||||||
| Reverse polarity protection | yes | ||||||
| Overvoltage protection | yes; (< 40 V) | ||||||
| Power-on delay time [s] | 0.3 | ||||||
| Integrated watchdog | yes | ||||||
| Inputs / outputs | |||||||
| Number of inputs and outputs | Number of digital outputs: 2 | ||||||
| Outputs | |||||||
| Total number of outputs | 2 | ||||||
| Output signal | switching signal; IO-Link; (configurable) | ||||||
| Electrical design | PNP/NPN | ||||||
| Number of digital outputs | 2 | ||||||
| Output function | normally open / closed; (configurable) | ||||||
| Max. voltage drop switching output DC [V] | 2 | ||||||
| Permanent current rating of switching output DC [mA] | 250 | ||||||
| Switching frequency DC [Hz] | < 170 | ||||||
| Short-circuit protection | yes | ||||||
| Type of short-circuit protection | yes (non-latching) | ||||||
| Measuring/setting range | |||||||
| Measuring range |
|
||||||
| Set point SP |
|
||||||
| Reset point rP |
|
||||||
| In steps of |
|
||||||
| Factory setting |
|
||||||
| Accuracy / deviations | |||||||
| Switch point accuracy [% of the span] | < ± 0,5 | ||||||
| Repeatability [% of the span] | < ± 0,1; (with temperature fluctuations < 10 K) | ||||||
| Characteristics deviation [% of the span] | < ± 0,25 (BFSL) / < ± 0,5 (LS); (BFSL = Best Fit Straight Line; LS = limit value setting) | ||||||
| Hysteresis deviation [% of the span] | < ± 0,25 | ||||||
| Long-term stability [% of the span] | < ± 0,05; (per 6 months) | ||||||
| Temperature coefficient zero point [% of the span / 10 K] | 0,2; (-20...80 °C) | ||||||
| Temperature coefficient span [% of the span / 10 K] | 0,2; (-20...80 °C) | ||||||
| Reaction times | |||||||
| Delay time programmable dS, dr [s] | 0; 0,2...50 | ||||||
| Software / programming | |||||||
| Parameter setting options | hysteresis / window; normally open / closed; Diagnostic function; switching logic; switch-on/switch-off delay; Damping; Display unit | ||||||
| Interfaces | |||||||
| Communication interface | IO-Link | ||||||
| Transmission type | COM2 (38,4 kBaud) | ||||||
| IO-Link revision | 1.1 | ||||||
| SDCI standard | IEC 61131-9 CDV | ||||||
| Profiles | no profile | ||||||
| SIO mode | yes | ||||||
| Required master port class | A | ||||||
| Process data analog | 1 | ||||||
| Process data binary | 2 | ||||||
| Min. process cycle time [ms] | 2.3 | ||||||
| Supported DeviceIDs |
|
||||||
| Operating conditions | |||||||
| Ambient temperature [°C] | -20...80 | ||||||
| Storage temperature [°C] | -40...100 | ||||||
| Protection | IP 65 | ||||||
| Display |
|
