Product Description
Gates CX195 Tri-Power Belt, 7/8 in Top Width, 1 Strand, 199 in Nominal Outside Length, Cogged
PN: CX195
- Belt edge is machined for even sheave groove contact, resulting in smoother running, less slip and wear
- Flex-bonded cords are strongly forged to the belt body, resulting in equal load distribution and absorption of bending stress without cord deterioration
- 15% capacity increase over wrapped belts
- Notches molded into the belt during manufacturing increase flexibility, making this belt well suited for drives with smaller diameter sheaves
- Suitable for all industrial applications, particularly where small or sub-minimal sheave diameters are required
- Meets ARPM/RMA IP-3-2 oil and heat resistant standards andIP-3-3 static conductivity requirements
- REACH and RoHS 2compliant.
Specifications
- Belt Category: Classical Series - Inch
- Section: CX
- Number Of Strands: 1
- Nominal Outside Length: 199 in
- Cogged/Smooth: Cogged
- Top Width Per Strand: 7/8 in
- Belt Style: TRI-POWER®
- Reinforcing Cord Material: Polyester
- Resistance Features: Oil Resistant
- Top Width: 7/8 in
- Effective Length: 199.309 in / 5062 mm
- Color: Black
- Material: Synthetic Rubber - SBR
- Operating Temperature Range: -60 to 250 °F
- Country of Origin: USA
- Standards Met: RMA
- Weight: 3.29 lbs
- Outside Circumference: 199.78 in / 5074 mm
- Angle: 38
- Belt Height: 17/32 in
- Belt/Slab: Belt
- Belt Back Side: Smooth
- Belt Inside: Notched
- Product Type: Industrial V-Belts
- Construction: Bandless
- Cord Material: Polyester
- Maximum Temperature: +250°F / +121 °C
- Minimum Temperature: -70°F / -51 °C
- Number of Sides: Single Sided
- Static Conductive: Yes
- Thickness: 13 mm
- Trademark: Tri-Power™
- Unitset: No