Product Description
Baldor WVM3613C General Purpose Motor, 3.7KW, 3450RPM, 3PH, 60HZ, D100LC, 3626M, TEFC
PN: WVM3613C
- Enclosure: TEFC
- Frame: D100LC
- Frame Material: Steel
- Frequency: 60.00 Hz
- Motor Letter Type: Three Phase
- Output @ Frequency: 3.700 KW @ 60 HZ
- Phase: 3
- Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ
- Voltage @ Frequency: 230.0 V @ 60 HZ, 208.0 V @ 60 HZ, 460.0 V @ 60 HZ
- Haz Area Class and Group: None
- Haz Area Division: Not Applicable
- Agency Approvals: CE, CSA, UR, WEEE
- Ambient Temperature: 40 °C
- Auxiliary Box: No Auxiliary Box
- Auxiliary Box Lead Termination: None
- Base Indicator: No Mounting
- Bearing Grease Type: Polyrex EM (-20F +300F)
- Blower: None
- Current @ Voltage: 5.800 A @ 460.0 V, 12.600 A @ 208.0 V, 11.600 A @ 230.0 V
- Design Code: B
- Drip Cover: No Drip Cover
- Duty Rating: CONT
- Efficiency @ 100% Load: 87.5 %
- Electrically Isolated Bearing: Not Electrically Isolated
- Feedback Device: NO FEEDBACK
- High Voltage Full Load Amps: 5.8 a
- Frame Prefix: D
- Front Face Code: Standard
- Front Shaft Indicator: None
- Heater Indicator: No Heater
- Insulation Class: F
- Inverter Code: Not Inverter
- KVA Code: K
- Lifting Lugs: No Lifting Lugs
- Locked Bearing Indicator: Locked Bearing
- Motor Lead Exit: Ko Box
- Motor Lead Termination: Flying Leads
- Motor Lead Quantity/Wire Size: 9 @ 16 AWG
- Motor Type: 3626M
- Mounting Arrangement: B14
- Number of Poles: 2
- Overall Length: 15.88 IN
- Power Factor: 93
- Product Family: General Purpose
- Pulley End Bearing Type: Ball
- Pulley Face Code: C-Face
- Pulley Shaft Indicator: Tapped & Key
- Rodent Screen: None
- Service Factor: 1.15
- Shaft Diameter: 1.103 IN
- Shaft Extension Location: Pulley End
- Shaft Ground Indicator: No Shaft Grounding
- Shaft Rotation: Reversible
- Shaft Slinger Indicator: No Slinger
- Speed: 3450 rpm
- Speed Code: Single Speed
- Motor Standards: IEC
- Starting Method: Direct on line
- Thermal Device - Bearing: None
- Thermal Device - Winding: None
- Vibration Sensor Indicator: No Vibration Sensor
- Winding Thermal 1: None
- Winding Thermal 2: None
