Product Description
Baldor Reliance Super E Motor, EM3714T
PN: EM3714T
Baldor Reliance EM3714T motors are general purpose three phase motors that are designed for both direct on line (DOL) and variable-speed operation. They are designed to work over a wide variable torque speed range and have an insulation system that meets the requirements of NEMA MG1 Part 31.4.4.2 for VFD use. They are also designed to conserve energy over extended time periods and are suitable for mounting in any position.
- Enclosure: TEFC
- Frame: 215T
- Frame Material: Steel
- Frequency: 60.00 Hz
- Motor Letter Type: Three Phase
- Output @ Frequency: 10.000 HP @ 60 HZ
- Phase: 3
- Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
- Voltage @ Frequency: 460.0 V @ 60 HZ / 230.0 V @ 60 HZ
- XP Class and Group: None
- XP Division: Not Applicable
- Agency Approvals: NEMA_PREMIUM / UR /NEMA PREMIUM / CSA EEV
- Ambient Temperature: 40 °C
- Auxillary Box: No Auxillary Box
- Auxillary Box Lead Termination: None
- Base Indicator: Rigid
- Bearing Grease Type: Polyrex EM (-20F +300F)
- Blower: None
- Current @ Voltage: 25.000 A @ 230.0 V / 27.000 A @ 208.0 V / 12.500 A @ 460.0 V
- Design Code: A
- Drip Cover: No Drip Cover
- Duty Rating: CONT
- Efficiency @ 100% Load: 91.7 %
- Electrically Isolated Bearing: Not Electrically Isolated
- Feedback Device: NO FEEDBACK
- High Voltage Full Load Amps: 12.5 a
- Front Face Code: Standard
- Front Shaft Indicator: None
- Heater Indicator: No Heater
- Insulation Class: F
- Inverter Code: Inverter Ready
- KVA Code: K
- Lifting Lugs: Standard Lifting Lugs
- Locked Bearing Indicator: No Locked Bearing
- Motor Lead Exit: Ko Box
- Motor Lead Termination: Flying Leads
- Motor Lead Quantity/Wire Size: 9 @ 14 AWG
- Motor Type: 3752M
- Mounting Arrangement: F1
- Number of Poles: 4
- Overall Length: 20.52 IN
- Power Factor: 85
- Product Family: General Purpose
- Pulley End Bearing Type: Ball
- Pulley Face Code: Standard
- Pulley Shaft Indicator: Standard
- Rodent Screen: None
- RoHS Status: ROHS COMPLIANT
- Service Factor: 1.15
- Shaft Diameter: 1.375 IN
- Shaft Extension Location: Pulley End
- Shaft Ground Indicator: No Shaft Grounding
- Shaft Rotation: Reversible
- Shaft Slinger Indicator: No Slinger
- Speed: 1770 rpm
- Speed Code: Single Speed
- Motor Standards: NEMA
- Starting Method: Direct on line
- Thermal Device - Bearing: None
- Thermal Device - Winding: None
- Vibration Sensor Indicator: No Vibration Sensor
- Winding Thermal 1: None
- Winding Thermal 2: None