Product Description
Baldor 33E160W311G1 Industrial Motor
PN: 33E160W311G1
The Baldor 33E160W311G1 is an industrial motor from Baldor-Reliance, a product brand of ABB that is known for its durability and efficiency. This motor is a good choice for industrial automation or motion control projects.
- Enclosure: TENV
- Frame: 42CZ
- Frame Material: Steel
- Frequency: 50.00 Hz / 60.00 Hz
- Motor Letter Type: Three Phase
- Output @ Frequency: .750 HP @ 50 HZ / .750 HP @ 60 HZ
- Phase: 3
- Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
- Voltage @ Frequency: 230.0 V @ 60 HZ / 190.0 V @ 50 HZ / 460.0 V @ 60 HZ / 380.0 V @ 50 HZ
- Agency Approvals: CSA, UR
- Ambient Temperature: 40 °C
- Auxillary Box: No Auxillary Box
- Auxillary Box Lead: Termination None
- Base Indicator: No Mounting
- Bearing Grease Type: Polyrex EM (-20F +300F)
- Blower: None
- Current @ Voltage: 3.000 A @ 190.0 V / 2.800 A @ 230.0 V / 1.500 A @ 380.0 V / 1.400 A @ 460.0 V
- Design Code: B
- Drip Cover No Drip Cover
- Duty Rating: CONT
- Efficiency @ 100% Load: 75.5 %
- Electrically Isolated Bearing: Not Electrically Isolated
- Feedback Device: NO FEEDBACK
- Feedback Signal: NONE
- High Voltage Full Load Amps: 1.4 a
- Front Face Code: Standard
- Front Shaft Indicator: None
- Heater Indicator: No Heater
- Insulation Class: F
- Inverter Code: Not Inverter
- KVA Code: M
- Lifting Lugs: No Lifting Lugs
- Locked Bearing Indicator: Locked Bearing
- Motor Lead Exit: Pipe Or Pipe Adaptor
- Motor Lead Termination: Cord
- Motor Lead Quantity/Wire Size: 9 @ 18 AWG
- Motor Type: 3332M
- Mounting Arrangement: F1
- Number of Poles: 4
- Overall Length: 11.44 IN
- Power Factor: 64
- Product Family: General Purpose
- Pulley End Bearing Type: Ball
- Pulley Face Code: C-Face
- Pulley Shaft Indicator: Special Combination
- Rodent Screen: None
- RoHS Status: ROHS COMPLIANT
- Service Factor: 1.00
- Shaft Diameter: 0.375 IN
- Shaft Extension Location: Pulley End
- Shaft Ground Indicator: No Shaft Grounding
- Shaft Rotation: Reversible
- Shaft Slinger Indicator: Shaft Slinger
- Speed: 1425 rpm / 1725 rpm
- Speed Code: Single Speed
- Motor Standards: NEMA
- Starting Method: Direct on line
- Thermal Device - Bearing: None
- Thermal Device - Winding: None
- Vibration Sensor Indicator: No Vibration Sensor
- Winding Thermal 1: None
- Winding Thermal 2: None
