Product Description
Baldor Reliance 10HP, 1770RPM Motor, M3714T
PN: M3714T
The Baldor Reliance 10HP, 1770RPM Motor, M3714T is a three-phase motor with a 60 HZ frequency and a 10.000 HP output. It has a 215T frame and a TEFC enclosure. It has a current of 13.500 A at 460.0 V, 27.000 A at 230.0 V, and 28.000 A at 208.0 V. It has an efficiency of 89.5% at 100% load.
- Enclosure: TEFC
- Frame: 215T
- Frequency: 60.00 Hz
- Motor Letter Type :Three Phase
- Output @ Frequency: 10.000 HP @ 60 HZ
- Phase :3
- Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
- Voltage @ Frequency :460.0 V @ 60 HZ, 230.0 V @ 60 HZ, 208.0 V @ 60 HZ
- XP Division: Not Applicable
- Agency Approvals: CSA, UR
- Ambient Temperature: 40 °C
- Auxillary Box: No Auxillary Box
- Auxillary Box Lead Termination: None
- Base Indicator: Rigid
- Bearing Grease Type: Polyrex EM (-20F +300F)
- Blower: None
- Current @ Voltage: 13.500 A @ 460.0 V, 27.000 A @ 230.0 V, 28.000 A @ 208.0 V
- Design Code: A
- Drip Cover: No Drip Cover
- Duty Rating: CONT
- Efficiency @ 100% Load: 89.5 %
- Electrically Isolated Bearing: Not Electrically Isolated
- Feedback Device: NO FEEDBACK
- High Voltage: Full Load Amps 13.5 a
- Front Face Code: Standard
- Front Shaft Indicator: None
- Heater Indicator: No Heater
- Insulation Class: F
- Inverter Code: Not Inverter
- KVA Code: K
- Lifting Lugs: Standard Lifting Lugs
- Locked Bearing Indicator: No Locked Bearing
- Motor Lead Exit: Ko Box
- Motor Lead Termination: Flying Leads
- Motor Lead Quantity/Wire Size: 9 @ 14 AWG
- Motor Type: 3740M
- Mounting Arrangement: F1
- Number of Poles: 4
- Overall Length: 19.01 IN
- Power Factor: 77
- Product Family: General Purpose
- Pulley End Bearing Type: Ball
- Pulley Face Code: Standard
- Pulley Shaft Indicator: Standard
- Rodent Screen: None
- Service Factor: 1.15
- Shaft Diameter: 1.375 IN
- Shaft Extension Location: Pulley End
- Shaft Ground Indicator: No Shaft Grounding
- Shaft Rotation: Reversible
- Shaft Slinger Indicator: No Slinger
- Speed: 1770 rpm
- Speed Code: Single Speed
- Motor Standards: NEMA
- Starting Method: Direct on line
- Thermal Device - Bearing: None
- Thermal Device - Winding: None
- Vibration Sensor Indicator: No Vibration Sensor
- Winding Thermal 1: None
- Winding Thermal 2: None
