Rosler Wire Belt Blast Cleaning Machine
Model #: JMB24x10/4
Serial #: DB000079
MFG YR: 2010
Condition: Used; In excellent condition
This unit was used up until May 2021 within a Japanese Automotive Parts Manufacturer. They are changing the process at this plant and no longer need it.
The JMB 24x10/4 Wire Mesh Belt Blast Machine is designed to clean soot, burned oil, and to
de-burr parts. This machine is completed by four 15 HP direct drive blast wheels. The parts are
loaded (by customer) onto a 25.5" wide continuous manganese wire mesh belt, which
transports them through the blast machine and into the unload area.
Clean blasting media is supplied to the blast wheel through the feed spout. The impeller rotates
to feed small quantities of blast media to the opening in the fixed control cage, and onto the
rotating blades. The blades fling the media onto the components being treated.
All blast wheel machines, irrespective of type, require the blast wheel to be correctly set in
order to achieve optimum treatment of the part. incorrectly set blast wheels will lead to
increased wear of the lining, and the internal blasting chamber.
The JMB 24x10/4 is equipped with four 15 horsepower direct drive blast wheels. Two blast
wheels are located on top of the blast cabinet to blast downwards to clean the top of the parts,
and two are mounted on the bottom of the blast cabinet to blast upwards to clean the bottom
side of the parts.
For Additional Information including Spec and Prints Click the Link Below: